Home > Cannot Open > Cannot Open Etc Path_to_inst

Cannot Open Etc Path_to_inst

if this file also not avilable run #devfsadm rebuild that file. SunOS Release ..... Really, so long as it's the same class of machine, you might copy that file from another machine, keep a safety copy of your corrupted file, and put the copy from At the following prompts, just hit enter:Enter filename [kernel/sparcv9/unix]:  << --------Hit enterEnter default directory for modules [/platform/SUNW,Ultra-5_10/kernel /platform/sun4u/kernel /kernel /usr/kernel]: Name of system file [etc/system]:  <<< Hit enterSunOS Release 5.8 Version Source

mount: /dev/vx/dsk/rootvol is not this fstype. Rebuild path_to_inst and devices ex: # devfsadm -r /a -p /a/etc/path_to_inst 8. What's that about? A post in Google's archives by Russ Button on December 24 1999, like a Christmas gift, recommends "b -var" (verbose, ask questions reconfigure).

Document Body: Top In the case where the /etc/path_to_inst file is corrupted to the point where booting from the disk is impossible, the following procedure can be used to rebuild the As always, I appreciate everyone's advice. y root filesystem type [ufs]: Enter physical name of root device [[email protected],600000/[email protected]/[email protected],0:a]: Hardware watchdog enabled Starting VxVM restore daemon... Copy it from the cdrom or restore from the backup tape.# cp /platform/`uname -i`/kernel/unix /mnt/platform/`uname -i`/kernel8."Cannot open '/etc/path_to_inst'System can not find the /etc/path_to_install file .It might be missing or corrupted and

  • Following are the steps that need to done.Cannot open "/etc/path_to_inst"1.
  • All rights reserved.
  • Cannot open '/etc/path_to_inst' Program terminated ok boot -a Probing system devices Probing memory Probing I/O buses Netra 240, No Keyboard Copyright 2005 Sun Microsystems, Inc.
  • When you get to the following prompt enter /pseudo/[email protected]:0Enter physical name of root device [/[email protected],0/[email protected],1/[email protected]/[email protected],0:a]: /pseudo/[email protected]:0  <<<<---- Enter this (this comes from /etc/system).System will now boot OK.WARNING: forceload of drv/ide failedWARNING:
  • Name of system file .....
  • Mount the root slice on /a ex: # mount /dev/dsk/c0t0d0s0 /a Note that your root slice may differ than the above example. 5.
  • If your system is Solaris[TM] 2.6 or older, you need to replace the devfsadm command with the following before reconfiguration boot. # drvconfig -r /a/devices -p /a/etc/path_to_inst # devlinks -r /a

Now, wait for the system to up! The time now is 08:28 PM. - Contact Us - UNIX & Linux - unix commands, linux commands, linux server, linux ubuntu, shell script, linux distros. - Advertising - Top Physical address of target disk is required which can be had by show-disk command on ok>.ok> nvalias disk7 /[email protected],e0000000/[email protected],e0001000/[email protected],81000/[email protected],80000/sd2,0The new aliased disk can be named as boot disk or can be How do I build one of these?

ok boot cdrom -sw ** Use Solaris media e.g. Toolbox.com is not affiliated with or endorsed by any company listed at this site. Advice on recovering a file system in less than 3 days? But as the boot proceeds I see "mount: /dev/dsk/c0t3d0s6 no such device" Without /etc/path_to_inst, Solaris won't know what device /dev/dsk/c0* was. -- Andrew Gabriel Back to top Larry Lindstrom*nix forums addictJoined:

Database Administrator For those who have ever come across the error: Cannot open '/etc/path_to_inst', this article provides an easy way in which to rebuild this file. I actually put the boot record on the correct slice for a change, and the boot started out good. But I wouldn't get my hopes up if I were you. Ethernet address 0:3:ba:5:76:c1, Host ID: 830576c1.

To rebuild this file boot the system with -ar option : ok>boot -ar Press enter to select default values for the questions asked during booting and select yes to rebuild /etc/path_to_install All rights reserved. Back to top Andrew Gabriel*nix forums GuruJoined: 19 Feb 2005 Posts: 454 Posted: Tue Sep 13, 2005 5:02 am Post subject: Re: Boot - Can't open /etc/path_to_inst In article , Larry Attachment Products Subscribe to Article Search Survey Did this article answer your question or resolve your issue?

Next, the system will ask you to rebuild the /etc/path_to_inst file. this contact form I just booted from floppy, running Solaris from the CD, and did the following: This is output from the script utility, so there shouldn't be any typos: Script started on Mon murali061 replied Jun 4, 2010 Hi thanks for all the replies. y system will continue booting after rebuilding the file.

Solaris 10 03/05 DVD # mount /dev/dsk/c0t3d0s0 /a ** Assumes your boot disk is c0t3d0s0 # rm /a/dev/dsk/c* /a/dev/rdsk/c* # devfsadm -r /a -p /a/etc/path_to_inst # umount /a # halt ok What's that about? You will be prompted with some system verification, just hit enter to continue. have a peek here This looks good.

That is why I said it is probably a dead disk or corrupted filesystem - otherwise why wouldn't it have just recreated it that first time? HomeAbout ALL CATEGORYOracleSAP BasisLinuxUNIXWebWordpressMySQLGoogleVirtualizationOperating SystemWindowsMaxDBAIXSolarisHP-UXRed HatSuSeMSSQLSoftwareDB2SAPSAP SolmanSAP SecuritySAP ABAPWindows 8Windows 7Windows XPWindows ServerMicrosoftAndroidSAP ParameterOracle Error MessageSAP ProgramASEASE Error Message DatabaseOracleOracle Error MessageMySQLMaxDBMSSQLDB2ASEASE Error MessageInternetWebWordpressGoogleOperating SystemLinuxRed HatSuSeUNIXAIXSolarisHP-UXVirtualizationWindowsWindows 8Windows 7Windows XPWindows ServerAndroidSoftwareMicrosoftSAPSAP BasisSAP However, third party disks may need to be reinstalled.

I've never seen this before.

Search Forums Show Threads Show Posts Tag Search Advanced Search Unanswered Threads Find All Thanked Posts Go to Page... linux operating commands and unix operating commands cannot open /etc/path_to_inst Email Address (Optional) Your feedback has been submitted successfully! falseIf you see "boot-device net" or true value for the other two parameter change it to the values above.In case you want to boot from network make sure your client is edgar5 Postfix 0 Thu Sep 10, 2009 6:33 am Email & Collaboration software based on Linux & O...

Is there any chance of getting back this server? You don't have to break the root mirror.Under VERITAS Volume Manager (tm) rootdisk encapsulation, the administrator must take an extra step to ensure the path_to_inst file is created and populated. Please enter a title. Check This Out Booting in single user mode and mounting root hard disk.Most important step in diagnosing the booting problems is booting the system in single user mode and examining the hard disk for

Terms of use for this information are found in Legal Notices.

Related Articles Article Languages x Translated Content Please note that this document is a translation from English, and may OpenBoot 4.17.1, 2048 MB memory installed, Serial #50689729. If you had /usr part of / the usual steps would be (from memory, might contain errors): (1) boot into single-user b -ba - or boot -ba Solaris 10: boot -a ysystem will continue booting after rebuilding the file.

Two choices of partitions to boot from, that's nice, select the Solaris partition, Can't open /etc/path_to_inst AAARG! Enter default directory for modules ............ Thanx Top Best Answer 0 Mark this reply as the best answer?(Choose carefully, this can't be changed) Yes | No Saving... Vaughn Fields replied Jun 2, 2010 If you have an explorer output somewhere, you can use that one or try this.

thanks for help all the same. If it passes the fsck, then you could try mounting the root partition to /mnt and see if you can repair the path_to_inst file (copy back a "path_to_inst.bak" or something if