Home > Event Id > Event Id 1058 Windows Cannot Access The File Gpt.ini

Event Id 1058 Windows Cannot Access The File Gpt.ini

The first event after the last 1030/1058 pair following it by 6 minutes was a SceCli 1704 policy refresh. Re-initialize CSC cache as explained in Method 1 at ME230738. (Note that performing this step without killing mobsync did not have any effect). 5. For example, if you have the domain "mydomain.local" you have to edit the hosts file on each DC as follows: mydomain.local 10.0.0.1 # local DC mydomain.local 10.0.0.2 # second DC mydomain.local x 2 Emily Bahgallah I had this issue also on a Windows 2003 SP1 DC and after reading all the comments here, I decided to reset the password, as that is http://outwardsound.com/event-id/event-id-1058-windows-cannot-access-gpt-ini.html

Posted by DWHunter on 06/18/2011 at 01:41 AM in Active Directory, Networking, Server 2008 | Permalink Digg This | Save to del.icio.us | | Comments You can follow this conversation by When you configure the domain controller in this way, the Workstation service on the domain controller cannot connect to the domain controller's Sysvol share. After that, everything worked. Microsoft Customer Support Microsoft Community Forums Windows Server TechCenter   Sign in United States (English) Brasil (Português)Česká republika (Čeština)Deutschland (Deutsch)España (Español)France (Français)Indonesia (Bahasa)Italia (Italiano)România (Română)Türkiye (Türkçe)Россия (Русский)ישראל (עברית)المملكة العربية السعودية (العربية)ไทย (ไทย)대한민국

Once again, gpupdate /force. Add them back if you removed them. Custom search for *****: Google - Bing - Microsoft - Yahoo Feedback: Send comments or solutions - Notify me when updated Printer friendly Subscribe Subscribe to EventID.Net now!Already a subscriber? x 1 Peter Hayden Event ID 1030/1058 on a domain controller may indicate that the Group Policy "Digitally sign communications ..." has been set too high.

x 1 Private comment: Subscribers only. Then by choosing properties on the correct GPO I checked what the trivial name ("DisplayName") was and remade that particular GPO in GPMC with pointers using dfs-paths instead. I added them and the errors went away after a gpupdate /force. See example of private comment Links: EventID 1030 from source Userenv, Google Thread, Deployment considerations for Group Policy, Troubleshooting XP Offline files, Symantec Endpoint Protection 11.0 - SBS 2003 Best Practices

Join Now I'm helping someone who tried upgrading Quickbooks from 2006 to 2009 on their Win2k3 SBS server and it failed.  Afterward the server became unstable and was shutting down at I ensured that there are no errors in the event log and then went back and set the GPOs to the same settings they were before. NOTE: You must launch this command as the user or computer whose credentials previously failed. Click Command Prompt.

During domain-upgrade from Windows Server 2000 to 2003, the proper ACLs are not granted on the existing GPOs. See ME810907 link below. The name of the domain controller is logged in the details of the error event. G'nite.

B.Right-click the appropriate connection and press Properties. x 111 Anonymous I had the same errors (1058 and 1030 every five minutes) and the ipconfig /registerdns command worked for me. Going in the DNS zone config for the zone (WINS tab), only the DC that was down was listed under the "Use WINS forward lookup" option. x 1 Nico Baumgartner I have had Userenv events 1030 and 1058 after uninstalling the network card team support on an HP Server.

Using Group Policy Manager I set all GPOs to "All settings disabled", then did a GPupdate /force on all DCs after replication. weblink I could, so I assumed that the client worked. Then log in as the user. 2) Upgrade McAfee to 8.5i. 3) Remove QoS from networking. 4) Make user administrator of local machine. x 1 Tom Holland As per Microsoft: "This behavior may occur if both of the following conditions are true: Your Windows XP-based computer is a member of a domain. -and- The

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\WaitForNetwork=1 was OK. It contained only one NS record for a DNS server that no longer existed. On the folder of the faulting GPO, right click and select Properties. http://outwardsound.com/event-id/event-id-1058-cannot-access-gpt-ini.html C.On the General tab, make sure that File and Printer Sharing for Microsoft Networks is checked.

I could view \\dcname\anyothershare but not \\dcname\sysvol. x 146 Krycek I had the same issue of not being able to access anything outside the domain controller (such as \\domain.local\share. See ME830676 for more details.

x 5 Andreas Czech In our case, the problem was caused by a registry entry that was missing.

Posted by: Tony | 02/27/2013 at 11:56 AM The comments to this entry are closed. x 1 Peter Appel In my case, I installed a W2k3 member server in a Domain with two W2k3 domain controllers. An example of English, please! What is the role of Userenv?

The posts also indicate that the Client for Microsoft Networks and the File and Printer Sharing services have to be bound to the network adapter. Finally, I dropped to a command prompt and found this Do you see it?  No, I don't mean my horrible "coloring job" - I mean the Junction pointing to C:\Winnt\path... It happened after I moved the DC from a Virtual Server to Hyper-V and it received new network card drivers. his comment is here The key and value are HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\GpNetworkStartTimeoutPolicyValue = 60.

and the problem was fixed. Replmon (from Windows Support Tools) has shown me the two versions of the GPO.