Vfs Unable To Mount Root Fs On Unknown-block(0 0)
I'm booted up just fine without it. For more advanced trainees it can be a desktop reference, and a collection of the base knowledge needed to proceed with system and network administration. I selected the samebasic driver support within the kernel as the first time, except Ididn't bother with some of the other bells and whistles I first had inthere. When I re-didthe install, I erased the partition table and started anew, so therewas no old cruft to begin with.I'm not sure if this contributed to anything, but I enabled all navigate here
To the best of my knowldege, in Debian, one of the core initramfs scripts, /scripts/local has the logic necessary to start udev and wait for the root device to be enumerated. Do Morpheus and his crew kill potential Ones? vertexua ★☆☆☆☆ (23.05.2010 1:43:58) СсылкаКстати. У меня такое при любой попытке загрузить мой root LVM раздел без initrd. Хочу одновременно LVM и без initrd. Реально? Использую (пока что) genkernelvertexua ★☆☆☆☆ (23.05.2010 Generic is the one that builds everything they think you'll need as =y and optional stuff as =m, huge builds everything as =y (which is almost guaranteed to work but gives
Vfs Unable To Mount Root Fs On Unknown-block(0 0)
It does seem to start out with some basic options and I was toldonce a long time ago to run mrproper to be sure to get it all out. He doesn't say he is, and I assume not - I would assume that SystemRescueCd would have a version of `lspci` supporting the -k flag, as it is based on Gentoo here is the exact message VFS: cannot open root device "sda3" or unknown-block (0,0) please append a correct "root=" boot option kernel panic- not syncing: VFS: unable to mount root fs
Von der Seite sollte das schon passen. ..paar Posts höher hatten wir das schon mal. snakeo2 View Public Profile View LQ Blog View Review Entries View HCL Entries Find More Posts by snakeo2 01-30-2006, 09:14 AM #8 Emerson LQ Guru Registered: Nov 2004 Location: Operator ASCII art Dishwasher Hose Clamps won't open Count trailing truths Need to change cash to cashier's check without bank account (Just arrived to the US) more hot questions question feed Unable To Mount Root Fs On Unknown Block 179 2 Raspberry Pi NTFS /dev/sda2 ....
Just starting out and have a question? Unable To Mount Root Fs On Unknown-block Raspberry Pi May be driver related, may be something >> else. >> >> Dale >> >> :-) :-) > > The BIOS sees both HD but, boot sector is working OK as grub It seems to me I am not the only one having this problem. In BIOS setup there a choice of IDE mode, AHCI mode, etc -- Joseph rdalek1967 at gmail Nov16,2010,7:45PM Post #4 of 17 (4056 views) Permalink Re: Cannot open root device "sda3" or unknown-block
Jump to: content Get Gentoo! Not Syncing Vfs Unable To Mount Root Fs On Unknown-block(2 0) BIOS is showing both hard drives >>> size: 200G and 500G >>> What to look for? >>> >> >> I would start by checking the kernel config. post the contents of Gentoo's /boot/grub/device.map file and output of fdisk -l command. Zum Seitenanfang Benutzerinformationen überspringen Michigen Profi Beiträge: 1062 6 05.12.2009, 09:16 Moin, Zitat von »Tatz« Müsste es aber nicht root (hd1,1) sein? /boot ist eine eigene Partition.
Unable To Mount Root Fs On Unknown-block Raspberry Pi
Make sure you have your >drive chipset BUILT INTO the kernel and whatever drivers you use for the >file system root is on also BUILT IN. It's the scenario I'vealways dreaded, and then one day it actually happens. Vfs Unable To Mount Root Fs On Unknown-block(0 0) On the "lspci -k" I think you mean lspci -nn (there is no switch -k) Anyhow, "dmesg |grep eth" shows: forcedeth 0000:00:14.0 ifname eth0, PHY OUI addr. 00:17:31:83:a1:53 udev: renamed network Unable To Mount Root Fs On Unknown-block(0 0) Gentoo maybe i'll download that kernel and try to install it again, see if that works.
Contact Gossamer Threads Web Applications & Managed Hosting Powered by Gossamer Threads Inc. check over here Baue den Kernel noch mal neu und Sata fest in den Kernel und Pata als Modul. Die angebotene Hilfe war doch nur gut gemeint, traurig das so etwas öffentlich belächelt wird... Then type in the name of the >driver and it should show you where it is exactly. > >Most CDs use the old IDE drivers so you may have to try Unable To Mount Root Fs On Unknown-block(2 0) Ubuntu
Apple - Think Different Zitat von »Linus Torvald« We all know Linux is great…it does infinite loops in 5 seconds. LINUX.ORG.RU Регистрация - Вход Имя: Пароль: Новости Галерея Форум Трекер Поиск Форум - Linux-install [gentoo] VFS: cannot open root device sda7 or unknown-block(0,0) 0 0 Ноут: Asus X59SLseries Ядро: 2.6.32-gentoo-r7 Anmelden Registrieren Ungelesene Beiträge Unbeantwortete Themen Themen der letzten 24 Stunden Erweiterte Suche Erweiterte Suche GentooForum.de Forum Portal Galerie Mitglieder Regeln Unser Sponsor: Linux-Onlineshop.de GentooForum.de » Gentoo Allgemein » Installation » his comment is here I think "lspci" list some chipset, MCP51 but kernel is not listing anything on MCP51 -- Joseph rdalek1967 at gmail Nov16,2010,8:40PM Post #6 of 17 (3988 views) Permalink Re: Cannot open root device
This is afresh install of Gentoo 2007.0 minimal CD stage 3, using the x86 quickinstall guide.Here's the error I get at boot while the kernel is loading its device drivers:VFS: Cannot Unable To Mount Root Fs On Unknown-block(0 0) Vmware Most likely not butsomething to remember next time.I just checked and I have a newer kernel on here. lshw and /boot/config-4.1.12-gentoo. –Alex Dec 30 '15 at 19:01 Are you booting off of a USB hard drive? –David King Dec 31 '15 at 1:46 Are you
I thought it was referring to old obsoleted hardware.
If you'd like to contribute content, let us know. BIOS is showing both hard drives >> size: 200G and 500G >> What to look for? >> > >I would start by checking the kernel config. I was able to successfully installed gentoo before but i was using linux-2.6.14-gentoo-r1 so maybe the new kernel does not like sata drives. Kernel Panic Vfs Unable To Mount Root Fs Redhat New Users: Read This First Reply With Quote 05-23-2007 #3 GivePeaceAChance View Profile View Forum Posts Private Message View Articles Linux User Join Date Aug 2005 Posts 341 The sdb is
I just recently set up aGentoo box on another machine, and kernel config gave me no problemswhatsoever, unlike now. Reply With Quote 05-24-2007 #7 devils casper View Profile View Forum Posts Private Message View Articles Super Moderator Join Date Jun 2006 Location Chandigarh, India Posts 24,776 post the contents of I've tried: install-amd64-minimal-20101111.iso install-amd64-minimal-20101007.iso The system start booting and stops at: Looking for the cdrom ... http://outwardsound.com/unable-to/esxi-5-vm-unknown-inaccessible.html i really doubht that this change is causing the problem.
VFS: Unable to mount root fs via NFS, trying floppy. The line that concerns me is about half way down the screen shot you attached where it reads: Please append a correct "root=" option; here are the available partitions: but lists It is amazing what you can accomplish if you do not care who gets the credit.